Home | SearchFAQ You are not logged in: Register | Log In
 
Please Read:
An important message from System 7 Today founder Dan Palka
 
 Topic: Sonnet Trio in 7.6.1??? (Page 1 of 1)
Post Reply
  djtbs1 (Profile)
  1 MB
 
Posted: Thu Oct 11, 2012 12:55 pm
Quote
  
I have a 7300 with a Dual-boot drive with 9.1 and 7.6.1 currently.

OK- so I understand the USB and Firewire on this card won't work in 7.6.
They could potentially work when booted in OS 9.

I was thinking about getting the Trio and wonder if the IDE on this card would work on 7.6.

That is the only desired function in 7.6.

Anyone tried the above?

Thanks
Ted
  
  Excalibur (Profile)
  8 MB
 
Posted: Fri Nov 02, 2012 3:47 pm
Quote
  
You should be able to use the IDE functionality with any Mac that has a PCI slot.

Only the usb and firewire are limited by software since they require drivers to operate properly. Obviously, the IDE has to be recognized in order for an OS to even load, so this function of the card has no software/OS limitation. It would only be limited by the firmware of your mainboard and the card was designed to be compatible with old-world Macs. I'm not aware of any Macs that won't recognize the card and I've tried it with several old beige models.
  
Topic Tools
Post Reply

Start New Topic in this folder.


© 2010 System7Today.com.
The Apple Logo, Macintosh™, Mac OS™, and others property of Apple Computer, Inc.
This site is in no way affiliated with Apple Computer, Inc.