Home | SearchFAQ You are not logged in: Register | Log In
 
Please Read:
An important message from System 7 Today founder Dan Palka
 
 Topic: virtual pc (Page 1 of 1)
Post Reply
  Pwr_mac_beige_g3 (Profile)
  8 MB
 
Posted: Tue Aug 29, 2006 7:45 am
Quote
  
I managed to get virtual pc with '95 on my 9500 with 7.6.1 when it said it only was for native G3 machines. I wish I had the '95 serial number. lol
  
  dpaanlka (Profile)
  1024 MB
 
Posted: Tue Aug 29, 2006 9:54 am
Quote
  
Virtual PC 3 will run under Mac OS 7.6.1 A G3 processor is "recommended" for Windows operation... however there is no actual way for Windows installed through Virtual PC to detect what kind of PowerPC processor you have, since Virtual PC pretends to be the same processor on every machine (I believe a Pentium II).
  
  RacerX (Profile)
  32 MB
 
Posted: Tue Aug 29, 2006 12:34 pm
Quote
  
Yeah, it says For G3 on the CD, but in the manual that came with VPC 3 it gives this as the system requirements:

PC-DOS: PowerPC 601/603/603e/604/604e/G3 at 100 MHz or faster, 7.5.5 or later.

Windows 95: PowerPC 603/603e/604/604e/G3 at 180 MHz or faster, 7.5.5 or later.

Windows 98: Any G3, 8.0 or later (9.0 or later for USB).
  
  demyan (Profile)
  16 MB
 
Posted: Tue Oct 31, 2006 4:58 am
Quote
  
Hi,
I'm using Virtual PC 2.0 on a Powerbook Duo 2300c with Mac OS 7.6.1 installed. But when I run Windows 3.11 on it, the mouse behaves somehow strange (I move the mouse, and the cursor goes as if the desktop was made of rubber - sometimes it even jumps to the other end of the screen...). Working is not really possible...
Does anybody have an idea?
Thanks,
Demyan
  
Topic Tools
Post Reply

Start New Topic in this folder.


© 2010 System7Today.com.
The Apple Logo, Macintosh™, Mac OS™, and others property of Apple Computer, Inc.
This site is in no way affiliated with Apple Computer, Inc.